When you have chosen the lights you require from our low voltage ConnectGo range, it is essential that a power source is purchased to power them. This small transformer is manufactured specifically for use with this range and will power up to a maximum of 600 LEDs.

Our 31V digital transformer boasts 8 different functions including: Combination, In Waves, Sequential, Slow-Glow, Flash, Slow Fade, Twinkling, and Steady On. Each time you switch the lights on, the built-in memory chip will automatically select the last function used.

Using the remote control included, you can easily select any of the display functions, set the timer, or even adjust your lights' brightness with the dimmer controls, with 4 brightness settings! The maximum range of the remote control to the controller is 8m. You can also control these settings from the in-line controller, where you'll find two buttons; one to adjust the brightness and to activate the timer functions (left), and one to choose between the 8 different display functions (right).

The handy timer function allows you to leave the lights switched on; they will remain illuminated for 6 or 8 hours, depending on which time period you select, before turning off for 18 or 16 hours, and then turning back on at the same time as the previous day.

Easy to use, simply press the button to choose between the different functions. To activate the timer, hold the button down for 3 seconds. The button will illuminate green to signal the timer is engaged; you can still cycle through the different functions whilst in timer mode.

Please note: the plug must be indoors, or in a suitable weatherproof enclosure. The 5m green lead cable can be used outdoors.