• Part of our cutting edge ConnectGo range.
• 6/8 hour timer function.
• Powers up to 4,000 LEDs.
• 4 ports (1,000 LEDs per port).
• Digital 31V transformer with 8 functions.
• Memory chip.
• 1.2m lead cable from plug to transformer 

When you have chosen the lights you require from our multi-power ConnectGo range, then it is essential that a power source is purchased to power them.

The premier choice for large domestic and commercial light displays, this large transformer, with black cable, is designed with quality and performance in mind, so powering up to a maximum of 4,000 LEDs is a breeze. It comes with 4 ports that can run separate light strings at the same time. Note: only 1,000 LEDs can be run from a single port at any one time. So if your display contains more than 1,000 then simply use the other ports to continue your display.

The 31V digital transformer boasts 8 different functions including: Combination, In Waves, Sequential, Slow-Glow, Flash, Slow Fade, Twinkling, and Steady On. Each time you switch the lights on, the built-in memory chip will automatically select the last function used. Easy to use, simply press the button to choose between the different functions.

The handy timer function allows you to leave the lights switched on; they will remain illuminated for 6 or 8 hours, depending on which timer you select, before turning off for 18 or 16 hours, and then turning back on at the same time as the previous day.

To activate the timer, hold the button down for 3 seconds. The button will illuminate green to signal the 6 hour timer is engaged and red for the 8 hour timer; you can still cycle through the different functions whilst in timer mode. To turn the timer off, again, simply press and hold the button for 3 seconds.

Please note: the plug must be indoors, or in a suitable weatherproof enclosure.

Product dimensions:

• Whole product length: 3.6m.
• From plug to transformer: 1.6m.
• From transformer to switch: 80cm.
• From transformer to first port: 1.4m.